Don
Latex

INTERIOR ACRYLIC PAINT

Advantages:

Good covering
Excellent adhesion to the substrate
Easy to maintain and clean
Does not contain harmful and dangerous substances for the environment
Provides white mat aesthetic surface
Permeable

Description:

Don Latex is a water dispersible acrylic white paint. Contain polymers, pigments and additives, finely dispersed in an aqueous phase.

Usage

Designed for interior painting of walls and ceilings in residential, public and other premises. Don Latex is applied on all mineral surfaces - concrete, masonry and plaster.

Materials Supplied

Don Latex is available in packs: 2 l, 5 l, 9 l and 15 l.

Coverage

Depending on substrate

45 - 65 ml/ 1 m²/ 1 coat

Storage/ Shelf Life

Don Latex has a shelf life of 12 months if stored in proper conditions, at temperatures range between + 5°C and + 35 °C in its original unopened packing.

Keep from freezing!

Standard

EN 13300

Technical Information

Density	1.42 g/cm³
Test drying EN ISO 3678:1996	< 3 h
Adhesion on substrate EN ISO 4624:2004	3.0 N/mm²
Liquid water permeability EN 1062-3:2008	0.1 - 0.5 II class
Hiding power EN ISO 6504-3:2007	≥ 98 < 99.5 Class 2
Wet scrub resistance at 200 cycles EN ISO 11998:2003	Class III ≥ 20 < 70
Film gloss at 85 °C EN ISO 2813:2001	completely mat, < 5
Maximum grain size EN 13300:2004	< 100 Fine
Brookfield viscosity EN ISO 2555:2003	7300 mPa.s

Application Information

SUBSTRATE PREPARATION

The substrate surface must be undamaged, clean and dry, dustfree and with any contaminants such as grease, mildew, residues of old coatings.

In the presence of uneven surfaces fill with product DCP.

The base should be primed. It is advisable to use Grundix DP.

APPLICATION

Stir well Don Latex before application.

Dilute with water, if necessary but not more than 5%.

Work at temperatures (of the air and the substrate) in the range between +5°C и +30°C, and relative air humidity below 80%. Don Latex is applied with a brush or paint roller in two coats.

The second layer is after complete drying of the first one (about 3h at ambient temperature of +20 °C).

The recommend is the second layer to be with undiluted paint.