AquaProof 1K Flex
Previous product Next product
AquaProof 2K Plus
 

AquaProof
2K

TWO COMPONENT CEMENTITIOUS WATERPROOFING
 
Advantages:
  • Suitable for water retaining structure and basements
  • Suitable for internal and external applications
  • Excellent protetion against carbon dioxide, chloride
    ions and water
  • Breathable, water vapour preamble
Description:

AquaProof 2K is is a two component polymer modified cementitious, flexible waterproof coating for internal and external applications.


Usage

AquaProof 2K is a two component polymer modified cementitious, flexible waterproof coating for internal and external applications available in many attractive colours.

Waterproofing of water retaining structures and reservoirs.

Protection of concrete substrates and masonry against carbon dioxide, chloride ions, water and de-icing salts.

Materials Supplied

AquaProof 2K is available in 20 kg packs -  5 kg polymer & 15 kg powder

Coverage


Approximately 20 kg / 11 m2 / 1mm

Storage/ Shelf Life


AquaProof 2K has a shelf life of 12 months from date of manufacture if stored at temperatures range between 5°C and 30°C.
If these conditions are exceeded, DCP Technical Department should be contacted for advice.

Remarks


AquaProof 2K should not be applied to frozen substrates or if ambient temperature is below 5°C or expected to fall below 5°C

Standard

  • EN 14891
  • EN 1504-2
  • EN 1504-3

Technical Information

Bulk density
1.7 ± 5% 
Resistance to water pressure
 (2 mm coating)
DIN 1048

> 30 m positive (3 bars)
Compressive strength after 28 days
EN 12190:2001
> 10 N / mm2
Class R-1
Аdhesion on concrete
EN 1542:2002
> 0.8 N / mm2
Capillary absorption
EN 13057:2003
< 0.5 kg / m2.h0.5

Permeability to CO2 : diffusion-equivalent air layer thickness Sd
EN 1062-6:2005
> 50 m
Watertightnessdoes not leak water at 150 kPa
Аdhesion strength after curing in normal conditions
EN 14891:2012

≥ 0.5 N / mm2
Аdhesion strength after immersion in water
EN 14891:2012

≥ 0.5 N / mm2
Аdhesion strength after  heat ageing
at 70 °C
EN 14891:2012

≥ 0.5 N / mm2
Аdhesion strength after freeze - thaw cycles
EN 14891:2012

≥ 0.5 N / mm2
Аdhesion strength after contact with chlorinate water
EN 14891:2012
≥ 0.5 N / mm2
Crack bridging ability under standard conditions
EN 14891:2012

≥ 0.75 mm

Wear resistance - Bohme after 28 days
EN 13892-3:2005
Class A 12
EN 13813

The technical data are specified at 23 ° C.

Application Information

SUBSTRATE PREPARATION

The surfaces to be coated should be clean, sound, and free from contamination. Remove any traces of curing compound, laitance, organic growth   or any other loose materials. This is best obtained by using high pressure water or light grit blasting. Substrate containing honey combing, damaged or deteriorated concrete should be repaired using suitable repair mortars from DCP repair systems before coating.


PRIMING

No special primer is required, but substrate should be pre-soaked with clean water prior to application of Aquaproof 2K.

MIXING

To ensure proper mixing, a mechanically powered mixer or drill  fitted with suitable paddle should be used. Add the liquid component of Aquaproof 2K to a clean container.   

The powder component is then added slowly to the liquid while mixing continuously with low speed mixer/drill (400 - 600 rpm). Mixing time should be continued for 3 minutes until a uniform consistency is obtained.


APPLICATION

Aquaproof 2K can be applied by brush, or spray machines. The mixed material should be brushed well into the surface. Strike off with brush in one direction. Care must be taken not to spread the materials too thin.
When the material begins to drag, do not add any water, but dampen the surface again.
Leave the first coat overnight to cure before applying the second coat. If the first coat is left for more than one day or if it is very dry, pre-soaking with clean water is needed before applying the second coat.
The second coat shall be applied by brush in a similar way to the first layer but preferably perpendicular to the previous layer to ensure good bond and coverage.



Download file

Safety Data Sheet A
Safety Data Sheet B
Declaration of Performance
DOP AquaProof 2K
Declaration of Performance 2
AquaProof 2K
Technical Data Sheet
Aquaproof 2K


Related products




How to





Connect with Don Construction Products


Name *
Email *
Phone
Address
Reason
Request  
Security Code *
Don Construction Products Bulgaria EAD

Sales office

Monday - Friday: 9:00 - 17:30

Sofia 1582, Bulgaria
152 Prof. Tsvetan Lazarov blvd.
Techno Park Sofia
Tel.: +359 2 870 2782; +359 2 870 2761

info.bulgaria@dcp-int.com

Technical support

+359 2 870 27 82

Contact form

Get Contact Form